November 30, 2010
To change the enable password: enable password N3wP@ssw0rd To change the telnet password: password N3wP@ssw0rd
4500 S Lakeshore Drive Tempe, AZ 85282
4500 E Speedway Blvd Tucson, AZ 85712
October 30, 2009
Make sure to run this command to enable the pptp fixup protocol. fixup protocol pptp 1723
April 22, 2009
Issues where the external interface on an ASA or Pix where it will suddenly stop receing traffic or dropping traffic is related to your duplex settings. […]
March 26, 2009
If you are remotely configuring a Cisco ASA or Pix there is always the concern that you’ll change a setting that will take down the network […]
March 25, 2009
The fix to this issue is to get into config mode and issue the following command.. fixup protocol ftp 21
March 23, 2009
If you are configure a Cisco Pix or ASA device and you have a server on the inside interface and clients on the outside who are […]
March 12, 2009
First thing you need to do is find a free TFTP server there are piles of them out there as a simple google search for TFTP […]
February 12, 2009
Make sure you are running a continuous ping on both sides of both firewalls. On a lot of the older firewalls there is a problem where […]